Every California contractor license carries one or more classifications, and the classification controls what the contractor may contract for. A license that's active but in the wrong class doesn't cover your job. This page explains the four branches and the rules that trip up homeowners most often.

The four branches

B&P Code §7055 divides contracting into general engineering, general building, residential remodeling and specialty contracting.

Class Name Typical work Statute
A General Engineering Fixed works needing engineering skill: grading, paving, sewers, pipelines, bridges, earthmoving §7056
B General Building Structures for shelter and enclosure that use at least two unrelated trades §7057
B-2 Residential Remodeling Improvements to existing residential wood frame structures using at least three unrelated trades §7057.5
C Specialty One specialized trade, such as electrical, plumbing or roofing §7058

The B license and the two-trade rule

A general building contractor's principal business is a structure that requires "the use of at least two unrelated building trades or crafts" (§7057(a)). The limits that matter to you are in §7057(b) and (c):

  • A B contractor may always take a framing or carpentry job.
  • For anything else, a prime contract must require at least two unrelated trades other than framing or carpentry. Otherwise the B contractor must hold the right specialty class or subcontract to a licensed specialty contractor.
  • Framing and carpentry don't count toward the two trades.
  • A B contractor can't contract for fire protection systems or well drilling without that classification or a licensed subcontractor.

In practice: a B contractor can run a kitchen remodel with cabinets, plumbing, electrical and drywall. A B contractor taking a job that is only a water heater swap needs a C-36 plumbing classification or a licensed plumbing sub.

The B-2 license and the three-trade rule

The B-2 Residential Remodeling classification was added by SB 1189 (Stats. 2020, ch. 364) (§7057.5). It's narrower than a B:

  • Existing homes only. The work must be on an existing residential wood frame structure.
  • Three trades, every time. A B-2 contractor may not take a contract unless it includes three or more unrelated trades.
  • Listed trades. Drywall, finish carpentry, flooring, insulation, painting, plastering, roof repair, siding, tiling, and installing or replacing electrical, plumbing and mechanical fixtures such as lights, switches, faucets, toilets and exhaust fans.
  • No structural work. A B-2 may not contract to change load-bearing parts of the structure, including footings, foundations, load-bearing walls and roof structures.
  • No new systems. A B-2 may not install, replace, substantially alter or extend electrical, mechanical or plumbing systems unless it holds that classification or subcontracts it. Minor alterations needed to install fixtures are allowed on a three-trade contract.
  • Restricted trades. Fire protection (C-16), asbestos abatement (C-22) and well drilling (C-57) need that license or a licensed sub.

If your remodel moves a wall that carries load or adds new circuits, a B-2 contractor alone can't contract for it. A B contractor, or the right specialty subcontractors, can.

Specialty (C) classifications

The CSLB lists 43 C classifications on its Licensing Classifications page, from C-2 Insulation to C-61 Limited Specialty. The scopes are set by regulation in Title 16 of the California Code of Regulations, printed in the CSLB 2026 Law Book. The ones homeowners hire most:

Class Trade Find one
C-8 Concrete Concrete contractors
C-10 Electrical Electricians
C-13 Fencing Fence contractors
C-17 Glazing Window and door contractors
C-20 Warm-air heating, ventilating and air conditioning HVAC contractors
C-27 Landscaping Landscapers
C-33 Painting and decorating Painters
C-36 Plumbing Plumbers
C-39 Roofing Roofers
C-46 Solar Solar rules
C-53 Swimming pool
C-61 Limited specialty (with "D" subcategories)

Some C scopes overlap. The C-36 plumbing scope includes gas appliances and flues but excludes forced warm-air units, which fall under C-20 (16 CCR §§832.20, 832.36). Solar water heating appears in C-36, and solar-assisted HVAC in C-20.

Incidental and supplemental work

A specialty contractor may take a contract that involves other trades only if the work outside its classification is "incidental and supplemental" to its own trade (B&P Code §7059(a)). A painter patching drywall before painting is one thing. A painter taking a contract to re-roof the house is another.

Certifications on top of a license

The CSLB also issues an Asbestos (ASB) certification and a Hazardous Substance Removal (HAZ) certification. HAZ is issued only to contractors who hold an A, B, C-10, C-12, C-21, C-34, C-36, C-49, C-57 or C-61/D-40 license, and asbestos-certified contractors can do abatement only within the classifications they already hold (CSLB Licensing Classifications).

Electrical workers employed by C-10 contractors also need individual certification from the Department of Industrial Relations (Labor Code §108.2). The licensing guide covers this.

Matching the license to your job

  1. List the trades in your project.
  2. One trade: hire the specialty contractor for it.
  3. Two or more unrelated trades besides framing, including structural or system work: a B contractor.
  4. Three or more trades, all cosmetic or fixture-level, on an existing wood frame home: a B or a B-2.
  5. Look up the license at the CSLB License Check and confirm the classification is listed.

For price ranges by trade, see remodeling costs, roofing costs and the other cost guides.

Related pages

Sources

Frequently Asked Questions

What is the difference between a B and a B-2 license in California?

A B (general building) contractor works on structures that require at least two unrelated trades and may do structural work (B&P Code §7057). A B-2 (residential remodeling) contractor works on existing residential wood frame structures, needs at least three unrelated trades on every contract, and may not change load-bearing parts or install or extend electrical, mechanical or plumbing systems unless it holds that license or subcontracts it (§7057.5).

Can a general contractor do my electrical work in California?

A B contractor can take a prime contract that includes electrical work only if the contract requires at least two unrelated trades other than framing or carpentry, or if it holds the electrical classification or subcontracts to a licensed electrical contractor (B&P Code §7057(b)).

Can a specialty contractor do work outside its classification?

Only work that is incidental and supplemental to its licensed trade (B&P Code §7059). A roofer can do minor related work needed to finish the roof, for example, but can't take on a separate trade as its own job.