Upgrading an electrical panel in Los Angeles typically costs $1,363 to $2,272, with an average of about $1,818, according to Angi's July 2026 Los Angeles data. Angi says that is about 18% above the national average for the same job. Rewiring a whole house runs about $2 to $4 per square foot.

Below are California prices for panels, rewiring and larger electrical projects, and how permits and labor affect the total.

Electrical job costs

Job Typical range Average Source
Panel upgrade, Los Angeles $1,363โ€“$2,272 $1,818 Angi panel upgrade guide
Panel replacement, Los Angeles $795โ€“$3,189 $1,990 Angi panel replacement guide
Service panel upgrade, ZIP 90012 $1,542โ€“$1,869 n/a Homewyse
Panel repair, ZIP 90012 $649โ€“$783 n/a Homewyse
Rewiring job, Los Angeles $773โ€“$4,304 $2,509 Angi rewiring guide
Full rewire, per square foot $2โ€“$4 n/a Angi rewiring guide
Circuit breaker replacement $100โ€“$200 n/a Angi panel upgrade guide

Sources: Angi Los Angeles panel upgrade (updated July 9, 2026), panel replacement (updated August 9, 2026) and rewiring (updated February 25, 2026) guides; Homewyse, May 2026, ZIP 90012. Accessed November 2026.

Homewyse's Fresno ZIP (93721) comes in about 8% lower: $1,423 to $1,725 for a panel upgrade and $599 to $722 for a panel repair.

Angi's panel replacement guide spans $150 for small repairs to more than $6,400 for major jobs such as moving the panel or raising the amperage.

Panel upgrade by amperage, Los Angeles

Service size Total cost
100 amps $944โ€“$1,770
150 amps $1,534โ€“$1,888
200 amps $1,534โ€“$2,360
300 amps $2,124โ€“$4,130
400 amps $2,360โ€“$4,720

Source: Angi, "How Much Does It Cost to Upgrade an Electrical Panel in Los Angeles, CA?" updated July 9, 2026, accessed November 2026.

Whole-house rewiring, Los Angeles

Home size (sq ft) Typical range
1,000 $2,000โ€“$4,000
1,500 $3,000โ€“$6,000
2,000 $4,000โ€“$8,000
3,000 $6,000โ€“$12,000

Source: Angi, "How Much Does Rewiring a House Cost in Los Angeles?" updated February 25, 2026, accessed November 2026.

Angi adds $75 to $150 for the permit and $100 to $125 for the inspection on a rewire, and up to $500 for cleanup. Walls usually need patching after old wiring comes out, so ask who does that and whether it is in the price.

Larger electrical projects: Cost vs Value 2025

Project Fresno Sacramento Los Angeles San Francisco National
Backup power generator $12,786 $12,979 $14,221 $16,641 $13,534
Solar power installation $53,060 $55,126 $59,130 $67,141 $55,937

Source: JLC Cost vs Value Report 2025, California city pages, accessed November 2026.

These are fixed, fully specified projects priced the same way in each city, so they are useful for comparing places, not for pricing a small system.

What drives electrical prices in California

Labor. Angi's Los Angeles guides quote electrician rates from $50 to $150 an hour (panel replacement) and $58 to $115 an hour (panel upgrade). A panel replacement takes 20 to 30 hours of labor, or $1,000 to $4,500, per Angi. The U.S. Bureau of Labor Statistics reports a mean wage of $41.28 an hour for California electricians in May 2025, against $34.37 nationally, about 20% higher. Contractor rates include overhead and insurance on top of wages.

Permits and the utility. Angi's panel replacement guide puts Los Angeles electrical permits for a panel at $100 to $500, and the upgrade guide says they start near $90, with separate Los Angeles Department of Water and Power fees of up to $170. Angi notes the electrician also coordinates the service connection with the utility, so ask how long the utility's part usually takes.

New loads. A heat pump, an EV charger or an induction range can push an older 100-amp panel past what it can carry. Ask the electrician for a load calculation before you agree to a larger service.

Licensing

Electrical contractors in California hold the C-10 Electrical classification from the Contractors State License Board. A license is needed for any job of $1,000 or more, labor and materials together, or any job that needs a permit. Confirm the license on the CSLB license search. Our contractor licensing guide explains bonds and workers' compensation.

Ways to keep the cost down

  • Combine jobs. If you plan a heat pump or EV charger, size the panel upgrade for both at once.
  • Get two quotes that list the panel brand, amperage, permit and utility fees.
  • Ask whether the quote includes patching and painting after rewiring.
  • Keep the down payment within the state limit of $1,000 or 10% of the price, whichever is less. See our guide to contracts and payments.

Get electrical quotes

Request quotes from California electricians, or browse licensed electricians in California. If the upgrade is for a heat pump, see California HVAC costs. For a kitchen or bath remodel with new circuits, see remodeling prices in California.

Sources

Frequently Asked Questions

How much does a 200-amp panel upgrade cost in Los Angeles?

Angi's Los Angeles guide, updated July 9, 2026, puts the total cost of a 200-amp upgrade at $1,534 to $2,360. Across all sizes, the typical panel upgrade runs $1,363 to $2,272, with an average of $1,818. Homewyse prices a service panel upgrade at $1,542 to $1,869 for ZIP 90012.

How much does it cost to rewire a house in Los Angeles?

Angi puts a complete rewire at about $2 to $4 per square foot, or $4,000 to $8,000 for a 2,000-square-foot house. Its overall Los Angeles rewiring average is $2,509, which includes smaller jobs.

Who handles the permit for a panel upgrade in Los Angeles?

Your electrician pulls the permit from the Los Angeles Department of Building and Safety and coordinates the service connection with the utility. Angi says permits for a panel upgrade start at about $90, with separate utility fees of up to $170.

What license does an electrician need in California?

An electrical contractor needs the C-10 Electrical classification from the Contractors State License Board for any job of $1,000 or more or any job that needs a permit. Check the license number on the CSLB website.