A siding replacement in Los Angeles typically costs $3,037 to $9,977, with an average of about $6,479, according to Angi's August 2026 Los Angeles data. That range includes partial jobs. Re-siding a whole house costs much more, and stucco sits at the top of the per-square-foot range.

Below are California siding prices from three sources, why they disagree, and what to check before you sign.

Siding costs from three sources

Job Typical range Source
Siding replacement, Los Angeles (all jobs) $3,037โ€“$9,977 (average $6,479) Angi
Vinyl siding, Los Angeles $5,600โ€“$12,800 (average $9,010) Angi
Fiber cement siding, Los Angeles $3,063โ€“$15,671 (average $9,367) Angi
Siding repair, Los Angeles $739โ€“$2,401 (average $1,487) Angi
Vinyl, 1,500 sq ft, ZIP 90012 $10,661โ€“$18,585 Homewyse
Fiber cement, 1,500 sq ft, ZIP 90012 $13,126โ€“$21,911 Homewyse
Stucco, 1,500 sq ft, ZIP 90012 $16,909โ€“$27,616 Homewyse

Sources: Angi Los Angeles siding replacement and repair guides (updated August 4, 2026), vinyl and fiber cement guides (updated February 25, 2026); Homewyse, May 2026. Accessed November 2026.

Angi's own pages do not agree with each other. Its fiber cement guide gives a $9,367 average but a size table that starts at $13,000 for an 800-square-foot home and reaches $21,300 for 2,000 square feet. Its replacement guide lists $8,000 to $36,000 for 2,000 square feet of siding. The headline averages include smaller and partial jobs. For a full house, the Homewyse and Cost vs Value figures are the better guide.

Homewyse's Fresno ZIP (93721) comes in about 4% to 5% lower: $10,136 to $17,528 for vinyl, $12,573 to $20,824 for fiber cement, and $16,258 to $26,355 for stucco.

Installed cost per square foot, Los Angeles

Material Angi Homewyse, ZIP 90012
Vinyl $4โ€“$13 $7.11โ€“$12.39
Wood $7โ€“$17 n/a
Engineered wood $7โ€“$25 n/a
Fiber cement $15โ€“$21 $8.75โ€“$14.61
Stucco $19โ€“$28 $11.27โ€“$18.41

Sources: Angi, "How Much Does Siding Replacement Cost in Los Angeles?" updated August 4, 2026; Homewyse, May 2026. Accessed November 2026.

Full re-siding: Cost vs Value 2025

Project Fresno Sacramento Los Angeles San Francisco National
Siding replacement, fiber cement $22,887 $22,287 $21,879 $24,197 $21,485
Siding replacement, vinyl $18,339 $18,019 $16,770 $19,844 $17,950
Manufactured stone veneer $11,738 $12,179 $13,271 $12,403 $11,702

Source: JLC Cost vs Value Report 2025, California city pages, accessed November 2026.

These are fixed-size projects priced the same way in each city. Los Angeles comes in below Fresno and Sacramento on both siding projects.

Siding repair costs

Angi puts the average Los Angeles siding repair at $1,487, with a typical range of $739 to $2,401. Repair rates by material:

Material Per square foot
Engineered wood $1โ€“$6
Wood $1โ€“$15
Vinyl $3โ€“$12
Aluminum $3โ€“$6
Fiber cement $5โ€“$14
Stucco $7โ€“$9

Source: Angi, "How Much Do Siding Repairs Cost in Los Angeles?" updated August 4, 2026, accessed November 2026.

Angi's repair guide suggests setting aside 10% to 20% of the repair budget for damage found once siding comes off.

Removal, permits and other add-ons

  • Removing old siding: $1 to $2 per square foot, and $4 to $7 per square foot for stucco (Angi replacement guide). The vinyl guide gives a higher stucco figure of $11 to $14.
  • Water damage or mold found underneath: $20 to $30 per square foot to fix (Angi fiber cement guide).
  • Taller homes: 10% to 25% more per square foot above two stories (Angi).
  • Permits: $100 to $500 for smaller repairs, $500 to $3,000 when the work changes structure or material (Angi repair guide).
  • Historic districts: a Certificate of Appropriateness can add $1,300 to $1,700 or more in a Historic Preservation Overlay Zone (Angi repair guide).
  • Inspection before you decide: $750 to $1,000 (Angi replacement guide).

What drives siding prices in California

Material. Stucco and fiber cement cost the most per square foot. Angi notes that vinyl can warp or fade in strong heat and sun, and that UV-protected vinyl holds up better, so ask which product the bid assumes.

Labor. Angi puts Los Angeles siding labor at $4 to $12 per square foot for installation and $40 to $125 an hour across its guides.

Older homes. Angi's fiber cement guide warns that old siding on older homes may contain asbestos, which needs proper testing and removal before new siding goes on.

Licensing

Stucco is licensed under the C-35 Lathing and Plastering classification from the Contractors State License Board. For other siding, ask the contractor which classification they hold and confirm it covers the job. A license is required for any job of $1,000 or more or any job that needs a permit. Look the contractor up on the CSLB license check, and see our California licensing guide.

Ways to keep the cost down

  • Measure your wall area, minus windows and doors, so every bid prices the same square footage.
  • Repair a damaged section of stucco or siding before water gets behind it.
  • Ask each bidder to price removal, wrap, trim and painting on separate lines.
  • Keep your deposit to $1,000 or 10% of the price, whichever is less, as California law requires. See contracts and payments.

Get siding quotes

Get free quotes from California siding contractors, or browse licensed siding contractors in California. If the new siding needs paint, see California painting costs. Replacing windows at the same time? See California window and door prices.

Sources

Frequently Asked Questions

How much does new siding cost in California?

It depends on how much wall you are covering. Angi's Los Angeles guide puts a typical siding replacement at $3,037 to $9,977, but its own size table shows $8,000 to $36,000 for 2,000 square feet of siding. Homewyse prices 1,500 square feet at $10,661 to $18,585 for vinyl and $13,126 to $21,911 for fiber cement in Los Angeles. Measure your wall area before comparing.

How much does stucco cost in Los Angeles?

Angi lists stucco at $19 to $28 per square foot installed in Los Angeles. Homewyse prices 1,500 square feet of stucco at $16,909 to $27,616 for ZIP 90012, or $11.27 to $18.41 per square foot. Stucco repairs run $7 to $9 per square foot in Angi's repair guide.

Do I need a permit for siding in Los Angeles?

Usually. Angi's Los Angeles siding repair guide says siding projects typically need a building permit, at $100 to $500 for smaller repairs and $500 to $3,000 for work that changes the structure or material. Homes in a Historic Preservation Overlay Zone may also need a Certificate of Appropriateness.

What license does a stucco contractor need in California?

Stucco work falls under the C-35 Lathing and Plastering classification from the Contractors State License Board. Any siding job of $1,000 or more, or any job that needs a permit, requires a licensed contractor.